TIE
rods
What are Tie Rods?
Tie Rods are connecting elements to transfer the load from the main wall to the anchor wall, providing greater passive resistance to prevent soil collapse from occuring.
With access to several top tie rod mills worldwide, we are able to offer a wide range of upset end tie rods options for your construction requirements. Our tie rods have been used extensively in projects over Asia. We supply the rods in full sets (with turnbuckles, bolts and plates) hence simplifying your workflow on site. Customization on the size, thickness, configuration, steel grades are available upon enquiry.
AVAILABLE STEEL GRADES AND APPLICATIONS
|
Tension Grade
|
Nominal Diameter
|
Min Tensile Strength
|
Min Yield Strength
|
Minimum Elongation
|
Reduction of Area
|
Impacting Energy J
|
||||
| mm | MPa | Mpa | % | % | 20oC | 0oC | -20oC | -40oC | -50oC | |
| 345 | 20 – 210 | 470 | 345 | 21 | 50 | 34 | 34 | 34 | 27 | – |
| 460 | 20 – 210 | 610 | 460 | 19 | 50 | – | 50 | 45 | 34 | 27 |
| 550 | 20 – 180 | 750 | 550 | 17 | 50 | – | 39 | 39 | 27 | 27 |
| 650 | 20 – 150 | 850 | 650 | 15 | 45 | – | 34 | 34 | 27 | 27 |
Type D2 Steel Tie Rods
|
Min Diameter: 35mm Max Diameter: 210mm Threads: Up to 410mm |
Our flagship Type D2 Steel Tie Rods are made from upset ends with eye. The eye provides a hinge point for the rods to transfer loadings in the most efficient manner.
The couplers, turnbuckles or articulated joints provide freedom in motion for the rods to tension at precise points required as per requirements.
The couplers, turnbuckles or articulated joints provide freedom in motion for the rods to tension at precise points required as per requirements.
Type D2 Steel Tie Rods
|
Min Diameter: 20mm Max Diameter: 210mm Threads: Up to 410mm |
Our Type II Steel Tie Rods are made with upset end. The whole cross section of the shaft can be stressed without any reduction due to notch factor.
This equates to reduced weight, lower cost, easier handling and a more uniform elongation across the bar.
This equates to reduced weight, lower cost, easier handling and a more uniform elongation across the bar.
Additional Information
Product Images
